Advken CP Squonk kit|Press filling system and fire button locking design Advken CP Squonk Mech kit Advken CP Squonk Mech kit, consists of the CP RDA and CP Bottom Feed Mechanical Box Mod. CP Mod is powered by single 18650 battery, and it adopts press filling and fire button locking design. Inside is the 7ml glass bottle, and there is a hole for users to check e-juice. While CP RDA features single coil building and post air holes design to deliver pure flavor, and a plate near positive pole effectively avoids splashing. Inside both the mod and the RDA, spring is added to ensure tight connection. Specification: CP BF Mod Size:50mm*24mm*86mm Squonk Bottle Capacity: 7ml Material: Plastic Battery: Single 18650 Battery (Not included) Thread: 510 thread Advken CP RDA Size: 22mm*28.4mm Material: Aluminum Alloy& Stainless Steel Click to see more detail about Advken CP Squonk Starter Mech kit Aspire Feedlink Revvo Squonk Kit The Feedlink Revvo Kit by Aspire is comprised of the Feedlink box mod and the Revvo Boost tank working in tandem to deliver you thicker clouds and purer flavor. The Feedlink mod is compact enough to ergonomically fit in any sized hand with the fire button, which is located on the top of the device for added convenience. It is powered by a single 18650 battery with a battery slot located on the bottom, a LED display to indicate the battery level, and a 7mL silicone squonk bottle for easier accessibility. When inserting the battery into the device, the LED display will flash blue when above 3.8V, a mixture of blue and orange when between 3.5V to 3.8V, and orange when below 3.5V. The Revvo Boost tank has a 2mL e-juice capacity with an adjustable airflow ring. It has a bottom-fill design through a squonk pin connection with wattage range between 70W to 80W. Innovative Aspire Radial Coil (ARC) technology is paired along with the Revvo Boost tank to provide a smoother and cleaner experience. Features: Easy to Use Comes with Revvo tank Squonk Mod User-Friendly Product Comes with 2 Coils Push Fire Button Lots of Spare O-rings You can use any BF atomizer Click to see more detail about Aspire Feedlink Revvo Squonk Kit Vandy Vape Pulse BF Squonk Kit The Vandy Vape Pulse BF Starter Kit is a collaboration between Vandy Vape and one of the industry's most influential voices, Tony B. of the Vapor Trail Channel. This ultra portable and lightweight unregulated MOD is compatible with both 18650 & 20700 batteries and is packed with exciting features typically only found in expensive devices. The Pulse features a safety switch to cut of power when carrying around, a spring loaded 510 connection and an 8ml food grade soft silicone bottle perfect for squonking. Two access points on the back of the device makes battery swapping and removal of the bottle a cinch The Pulse MOD has a detachable structure, allowing you to swap out the panels to match your style. Included with the starter kit is the Pulse 24 RDA which houses 2ml's of your favorite juice, has a unique leak resistant side airflow and is one of the easiest bottom feeding RDA's to build. Specification: Size: 100*50*27mm Thread Type: Spring loaded 510 Battery:18650/20700(battery not included) Capacity:8ml G.W(Included package): 250g Material:Nylon+ABS)High temperature resistant) Click to buy Vandy Vape Pulse BF Kit Click to see more Cheap Squonk Kit
