Info Update Emmc-Pro

Discussion in 'Emmc-Pro' started by tony.wong, Feb 19, 2017.

1,333 Views
Threads sundul by users
    More threads by tony.wong
    1. tony.wong

      tony.wong
      ♡♡♡
      Memiliki 854 likes
      Staff Member Super Moderator

      Joined:
      Feb 12, 2017
      Messages:
      218
      eMMC Pro 1.08 Release Notes

      [16 JAN 2017]

      We are trying to make more powerful eMMC software with every each update
      There are alof of optimizations and progres based on customers requests and demands.
      1. # Detection Routines improved .
      2. # SW Default Set as "12 Mhz"
      3. # Format Functions added
      4. # Partitioning / GP Area Partitioning features added.
      5. # Config Features Added .
      6. # Soft Erase Function Added .
      7. # Deep Erase Function Added .
      8. # UI - Full Flash mode added .
      9. # UI - Partition mode added .
      10. # UI - Selection USER ( ROM1 ) .
      11. # UI - Selection BOOT1 ( ROM2 ) .
      12. # UI - Selection BOOT2 ( ROM3 ) .
      13. # UI - CID Parsing .
      14. # UI - CSD Parsing .
      15. # UI - Config Added .
      16. # UI - GP Area Partition Settings added .
      17. # New Firmware Released Version = 2016122615000000
      When you first run eMMC Pro V1.08 sw will update your firmware .
      With the new firmware we have implemented better detection and more features.
      and makes it more stable and alot more powerful .[Config Features Added]
      We have added Format , Soft Erase , Deep Erase Function in the software
      [Soft Erase]
      Provides a host explicit erase function.
      The erasable unit of the eMMC is the “Erase Group”;
      Erase group is measured in write blocks which are the basic writable units of the Device.
      Once the erase command completes successfully, the device address range that was erased shall behave-
      as if it was overwritten with all ‘0’ or all ‘1’ depending on the different memory technology. [Deep Erase]
      In addition to the Soft Erase command there is also an optional Deep Erase command.
      The Deep Erase command differs from the Soft Erase command in that it requires the device to -
      execute the erase operation on the memory array when the command is issued and
      requires the device and host to wait until the operation is complete.

      This should be executed the Deep Erase command with caution to avoid unintentional data loss.[Solution for :]
      1. # Wipe failed on MTK devices will be easily fixed with this option.
      2. # Corrupt Disk not functioning will be solved such as Disks
        "not write protected" but devices can not be written firmware.
      [Partitioning :]
      General Purpose Area Partition, RPMB Partitions can be configured
      General Purpose Partitions can be programmed by the setting the corresponding-
      values defined on eMMC Pro Software and written into the Extended CSD registers
      only once in the device life-cycle. [UI Improvements : ]
      [Full Flash mode : ]
      When the file is selected with Full Flash Mode .
      You are able to write the complete file as one and whole !
      [Partition mode : ]
      Partitions of the Dump File Selected will be displayed on the eMMC Pro UI
      By selecting each partition and selected partitions will be written into target device .
      [Frequency Set : ]
      12 Mhz as Default

      [Area : ]
      USER ( ROM1 )
      BOOT1 ( ROM2 )
      BOOT2 ( ROM3 )
      In order to comply among the eMMC Boxes and for easy understanding for our users .
      We have identified the on the software ROM1 , ROM2 and ROM3 for each Area
      There is full access (R/W) and all the features are compatible with eMMC Pro.
      [CID / CSD Parsing : ]
      There is alot of information is provided with the CID and CSD Values
      such as Manufacturer Details , Device Configuration , Write Protection ,
      Serial Number , etc.. Complete device specifications of the eMMC
      Complete identification of the eMMC will be displayed in eMMC Pro UI .


      [eMMC Pro Support page : ]
      We are sorry we had a down time during the new year season
      but we recovered everything is perfect now .
      Thanks for all the feedbacks.




      Thank you for all eMMC Pro Customers to keep sending us requests and suggestions .
      There is a lot more to come

      Best Regards
      eMMC Pro Team
      www.eMMC-Pro.com
       

      Attached Files:

      luthfi and UnguCellular like this.
    2. Loading...

      Similar Threads Forum Date
      Forum Infoflasher dijual The Lounge Apr 1, 2017
      VOOPOO ARGUS GT II - Updated Version Of VOOPOO ARGUS GT Other Marketplace Apr 18, 2022
      Uwell Caliburn AK2 - Updated Version of KOKO & KOKO Prime Other Marketplace Sep 29, 2021
      NEWS UPDATE UFI Software v1.6.0.2202 6th Anniversary Update UFI Aug 28, 2021
      Clearance Updated! $7.87 SMOK Trinity Alpha Pod Vape Kit Other Marketplace Jan 9, 2020

    3. Gaspol Cell

      Gaspol Cell

      Memiliki 1 likes
      Member

      Joined:
      Feb 19, 2017
      Messages:
      2
      joss kang,mari berbagi di mari para pengguna EMMC-Pro
       
      tony.wong likes this.
    4. mmet☆

      mmet☆

      Memiliki 71 likes
      Member

      Joined:
      Feb 15, 2017
      Messages:
      77
      tool alternativ buat yang gak punya ufi
       
    5. Jangan Bilang Waras

      Jangan Bilang Waras

      Memiliki 39 likes
      Staff Member Moderator

      Joined:
      Feb 15, 2017
      Messages:
      91
      nyari yg secend....kajen box hungkul nte nenaon...yg penting oye lah:):)
       
    6. Gaspol Cell

      Gaspol Cell

      Memiliki 1 likes
      Member

      Joined:
      Feb 19, 2017
      Messages:
      2
      barangkali ada yg punya fix solution untuk failed 16 mohon berbagi guru...kmrn2 oppo r831k dh mau konek dibantu PSU tanpa vcc&vccQ,tpi ini ada oppo r831k,a11w,failed 16 mulu
       
    7. tony.wong

      tony.wong
      ♡♡♡
      Memiliki 854 likes
      Staff Member Super Moderator

      Joined:
      Feb 12, 2017
      Messages:
      218
      eMMC Pro New Models
      [17 MAR 2017]We are releasing more models ,
      more dumps , more pinouts for our customer demands .
      Thanks for the feedbacks for our all eMMC Pro Users .

      We just released eMMC Pro V1.08 here
      • # Asus Zenfone 5 Pinouts / Fixed Uploaded
      • # HTC M9 (SOFF) 0PJA1000 Dump Uploaded[ World First ]
      • # LG D175 Dump Uploaded
      • # LG D175 eMMC Pinouts Uploaded
      • # LG E730 Dump Uploaded
      • # LG E730 eMMC Pinouts Uploaded
      • # Moto E XT1022 Dump Uploaded
      • # Moto E XT1022 eMMC Pinouts Uploaded
      • # Samsung E210S Dump Uploaded
      • # Samsung E210S eMMC Pinouts Uploaded
      • # ZTE Q802T eMMC Pinouts Uploaded [ World First ]
      • # ZTE Q802T Dump Uploaded [ World First ]


      You can now operate with almost all mobile phones with eMMC / eMCP inside !
      [​IMG]


      Advanced eMMC Repair
      • Universal Device Programmer
      • Free eMMC Booster with eMMC Pro Hardware

      We have friends here , sharing and discussing

      eMMC PRo - Universal Device Programmer
       
      luthfi likes this.

    Share This Page